Asus F3SV/lshal
From Gentoo Linux Wiki
< Asus F3SV(Redirected from HARDWARE Asus F3SV/lshal)
| File: lshal |
lshal
Dumping 116 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
info.bus = 'unknown' (string)
info.callouts.add = {'hal-storage-cleanup-all-mountpoints'} (string list)
info.capabilities = {'cpufreq_control'} (string list)
info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list)
info.product = 'Computer' (string)
info.subsystem = 'unknown' (string)
info.udi = '/org/freedesktop/Hal/devices/computer' (string)
org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
power_management.can_hibernate = true (bool)
power_management.can_suspend = true (bool)
power_management.can_suspend_hybrid = false (bool)
power_management.can_suspend_to_disk = true (bool)
power_management.can_suspend_to_ram = true (bool)
power_management.is_powersave_set = false (bool)
power_management.type = 'acpi' (string)
smbios.bios.release_date = '07/09/2007' (string)
smbios.bios.vendor = 'American Megatrends Inc.' (string)
smbios.bios.version = '204' (string)
smbios.chassis.manufacturer = 'ASUSTeK Computer Inc.' (string)
smbios.chassis.type = 'Notebook' (string)
smbios.system.manufacturer = 'ASUSTeK Computer Inc.' (string)
smbios.system.product = 'F3Sv' (string)
smbios.system.serial = 'NF1S7602520009' (string)
smbios.system.uuid = '8F2F81DC-19B5-D48C-1F00-001BFC484C8D' (string)
smbios.system.version = '1.0' (string)
system.chassis.manufacturer = 'ASUSTeK Computer Inc.' (string)
system.chassis.type = 'Notebook' (string)
system.firmware.release_date = '07/09/2007' (string)
system.firmware.vendor = 'American Megatrends Inc.' (string)
system.firmware.version = '204' (string)
system.formfactor = 'laptop' (string)
system.hardware.product = 'F3Sv' (string)
system.hardware.serial = 'NF1S7602520009' (string)
system.hardware.uuid = '8F2F81DC-19B5-D48C-1F00-001BFC484C8D' (string)
system.hardware.vendor = 'ASUSTeK Computer Inc.' (string)
system.hardware.version = '1.0' (string)
system.kernel.machine = 'i686' (string)
system.kernel.name = 'Linux' (string)
system.kernel.version = '2.6.22-gentoo-r1034' (string)
system.product = 'F3Sv 1.0' (string)
system.vendor = 'ASUSTeK Computer Inc.' (string)
udi = '/org/freedesktop/Hal/devices/computer_backlight'
info.capabilities = {'laptop_panel'} (string list)
info.category = 'laptop_panel' (string)
info.interfaces = {'org.freedesktop.Hal.Device.LaptopPanel'} (string list)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Generic Backlight Device' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_backlight' (string)
laptop_panel.access_method = 'general' (string)
laptop_panel.num_levels = 16 (0x10) (int)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'backlight' (string)
linux.sysfs_path = '/sys/class/backlight/asus' (string)
org.freedesktop.Hal.Device.LaptopPanel.method_argnames = {'brightness_value', ''} (string list)
org.freedesktop.Hal.Device.LaptopPanel.method_execpaths = {'hal-system-lcd-set-brightness', 'hal-system-lcd-get-brightness'} (string list)
org.freedesktop.Hal.Device.LaptopPanel.method_names = {'SetBrightness', 'GetBrightness'} (string list)
org.freedesktop.Hal.Device.LaptopPanel.method_signatures = {'i', ''} (string list)
udi = '/org/freedesktop/Hal/devices/acpi_AC0'
ac_adapter.present = true (bool)
info.capabilities = {'ac_adapter'} (string list)
info.category = 'ac_adapter' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AC Adapter' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_AC0' (string)
linux.acpi_path = '/proc/acpi/ac_adapter/AC0' (string)
linux.acpi_type = 3 (0x3) (int)
linux.hotplug_type = 4 (0x4) (int)
udi = '/org/freedesktop/Hal/devices/acpi_P001'
info.capabilities = {'processor'} (string list)
info.category = 'processor' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_P001' (string)
linux.acpi_path = '/proc/acpi/processor/P001' (string)
linux.acpi_type = 1 (0x1) (int)
linux.hotplug_type = 4 (0x4) (int)
processor.can_throttle = true (bool)
processor.number = 0 (0x0) (int)
udi = '/org/freedesktop/Hal/devices/acpi_P002'
info.capabilities = {'processor'} (string list)
info.category = 'processor' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_P002' (string)
linux.acpi_path = '/proc/acpi/processor/P002' (string)
linux.acpi_type = 1 (0x1) (int)
linux.hotplug_type = 4 (0x4) (int)
processor.can_throttle = true (bool)
processor.number = 1 (0x1) (int)
udi = '/org/freedesktop/Hal/devices/acpi_BAT0'
battery.charge_level.capacity_state = 'ok' (string)
battery.charge_level.current = 49434 (0xc11a) (int)
battery.charge_level.design = 51260 (0xc83c) (int)
battery.charge_level.granularity_1 = 506 (0x1fa) (int)
battery.charge_level.granularity_2 = 506 (0x1fa) (int)
battery.charge_level.last_full = 50941 (0xc6fd) (int)
battery.charge_level.low = 2563 (0xa03) (int)
battery.charge_level.percentage = 97 (0x61) (int)
battery.charge_level.rate = 0 (0x0) (int)
battery.charge_level.unit = 'mWh' (string)
battery.charge_level.warning = 5126 (0x1406) (int)
battery.is_rechargeable = true (bool)
battery.model = 'F3---24' (string)
battery.present = true (bool)
battery.rechargeable.is_charging = false (bool)
battery.rechargeable.is_discharging = false (bool)
battery.reporting.current = 49434 (0xc11a) (int)
battery.reporting.design = 51260 (0xc83c) (int)
battery.reporting.granularity_1 = 506 (0x1fa) (int)
battery.reporting.granularity_2 = 506 (0x1fa) (int)
battery.reporting.last_full = 50941 (0xc6fd) (int)
battery.reporting.low = 2563 (0xa03) (int)
battery.reporting.rate = 0 (0x0) (int)
battery.reporting.technology = 'LIon' (string)
battery.reporting.unit = 'mWh' (string)
battery.reporting.warning = 5126 (0x1406) (int)
battery.technology = 'lithium-ion' (string)
battery.type = 'primary' (string)
battery.vendor = 'ASUSTEK' (string)
battery.voltage.current = 12390 (0x3066) (int)
battery.voltage.design = 11100 (0x2b5c) (int)
battery.voltage.unit = 'mV' (string)
info.capabilities = {'battery'} (string list)
info.category = 'battery' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Battery Bay' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_BAT0' (string)
linux.acpi_path = '/proc/acpi/battery/BAT0' (string)
linux.acpi_type = 0 (0x0) (int)
linux.hotplug_type = 4 (0x4) (int)
udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
alsa.device_file = '/dev/snd/timer' (string)
alsa.type = 'timer' (string)
info.capabilities = {'alsa'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ALSA Timer Device' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string)
linux.device_file = '/dev/snd/timer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/timer' (string)
udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'
info.capabilities = {'oss'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'OSS Sequencer Device' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string)
linux.device_file = '/dev/sound/sequencer2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/sequencer2' (string)
oss.device_file = '/dev/sound/sequencer2' (string)
oss.type = 'sequencer' (string)
udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'
info.capabilities = {'oss'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'OSS Sequencer Device' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string)
linux.device_file = '/dev/sound/sequencer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/sequencer' (string)
oss.device_file = '/dev/sound/sequencer' (string)
oss.type = 'sequencer' (string)
udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
alsa.device_file = '/dev/snd/seq' (string)
alsa.type = 'sequencer' (string)
info.capabilities = {'alsa'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ALSA Sequencer Device' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string)
linux.device_file = '/dev/snd/seq' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/seq' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
button.has_state = true (bool)
button.state.value = false (bool)
button.type = 'lid' (string)
info.addons = {'hald-addon-keyboard'} (string list)
info.capabilities = {'input', 'input.switch', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Lid Switch' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string)
input.device = '/dev/input/event2' (string)
input.product = 'Lid Switch' (string)
linux.device_file = '/dev/input/event2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input2/event2' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
button.has_state = false (bool)
button.type = 'sleep' (string)
info.addons = {'hald-addon-keyboard'} (string list)
info.capabilities = {'input', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Sleep Button (CM)' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string)
input.device = '/dev/input/event1' (string)
input.product = 'Sleep Button (CM)' (string)
linux.device_file = '/dev/input/event1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input1/event1' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
button.has_state = false (bool)
button.type = 'power' (string)
info.addons = {'hald-addon-keyboard'} (string list)
info.capabilities = {'input', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button (FF)' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string)
input.device = '/dev/input/event0' (string)
input.product = 'Power Button (FF)' (string)
linux.device_file = '/dev/input/event0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input0/event0' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_0'
info.bus = 'pnp' (string)
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Board' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0d' (string)
pnp.description = 'System Board' (string)
pnp.id = 'PNP0c01' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
info.bus = 'pnp' (string)
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0c' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)
udi = '/org/freedesktop/Hal/devices/pnp_IFX0102'
info.bus = 'pnp' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (IFX0102)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_IFX0102' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0b' (string)
pnp.id = 'IFX0102' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
info.bus = 'pnp' (string)
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0103'
info.bus = 'pnp' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (PNP0103)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:09' (string)
pnp.id = 'PNP0103' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
info.bus = 'pnp' (string)
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:08' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
info.bus = 'pnp' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Math Coprocessor' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:07' (string)
pnp.description = 'Math Coprocessor' (string)
pnp.id = 'PNP0c04' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
info.bus = 'pnp' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT-style speaker sound' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:06' (string)
pnp.description = 'AT-style speaker sound' (string)
pnp.id = 'PNP0800' (string)
udi = '/org/freedesktop/Hal/devices/pnp_SYN0a06'
info.bus = 'pnp' (string)
info.linux.driver = 'i8042 aux' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (SYN0a06)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_SYN0a06' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:05' (string)
pnp.id = 'SYN0a06' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
info.bus = 'pnp' (string)
info.linux.driver = 'i8042 kbd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:04' (string)
pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string)
pnp.id = 'PNP0303' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
info.bus = 'pnp' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT Real-Time Clock' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:03' (string)
pnp.description = 'AT Real-Time Clock' (string)
pnp.id = 'PNP0b00' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
info.bus = 'pnp' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT DMA Controller' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:02' (string)
pnp.description = 'AT DMA Controller' (string)
pnp.id = 'PNP0200' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
info.bus = 'pnp' (string)
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Board' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:01' (string)
pnp.description = 'System Board' (string)
pnp.id = 'PNP0c01' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08'
info.bus = 'pnp' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (PNP0a08)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:00' (string)
pnp.id = 'PNP0a08' (string)
udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
info.bus = 'platform' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (vesafb.0)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_vesafb_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/vesafb.0' (string)
platform.id = 'vesafb.0' (string)
udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
info.bus = 'platform' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (pcspkr)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/pcspkr' (string)
platform.id = 'pcspkr' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042'
info.bus = 'platform' (string)
info.linux.driver = 'i8042' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (i8042)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/i8042' (string)
platform.id = 'i8042' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port'
info.bus = 'serio' (string)
info.linux.driver = 'psmouse' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 AUX3 port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio4' (string)
serio.description = 'i8042 AUX3 port' (string)
serio.id = 'serio4' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input'
info.capabilities = {'input'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port' (string)
info.product = 'SynPS/2 Synaptics TouchPad' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input' (string)
input.device = '/dev/input/event3' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port' (string)
input.physical_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port' (string)
input.product = 'SynPS/2 Synaptics TouchPad' (string)
linux.device_file = '/dev/input/event3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input3/event3' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX2_port'
info.bus = 'serio' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 AUX2 port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX2_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio3' (string)
serio.description = 'i8042 AUX2 port' (string)
serio.id = 'serio3' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port'
info.bus = 'serio' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 AUX1 port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX1_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio2' (string)
serio.description = 'i8042 AUX1 port' (string)
serio.id = 'serio2' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX0_port'
info.bus = 'serio' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 AUX0 port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX0_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio1' (string)
serio.description = 'i8042 AUX0 port' (string)
serio.id = 'serio1' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
info.bus = 'serio' (string)
info.linux.driver = 'atkbd' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 KBD port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string)
serio.description = 'i8042 KBD port' (string)
serio.id = 'serio0' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
info.addons = {'hald-addon-keyboard'} (string list)
info.capabilities = {'input', 'input.keyboard', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
info.product = 'AT Translated Set 2 keyboard' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string)
input.device = '/dev/input/event4' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
input.physical_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
input.product = 'AT Translated Set 2 keyboard' (string)
linux.device_file = '/dev/input/event4' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input4/event4' (string)
udi = '/org/freedesktop/Hal/devices/platform_bluetooth'
info.bus = 'platform' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (bluetooth)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_bluetooth' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/bluetooth' (string)
platform.id = 'bluetooth' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_2829'
info.bus = 'pci' (string)
info.linux.driver = 'ahci' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2829' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string)
pci.device_class = 1 (0x1) (int)
pci.device_protocol = 1 (0x1) (int)
pci.device_subclass = 6 (0x6) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string)
pci.product = '82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller' (string)
pci.product_id = 10281 (0x2829) (int)
pci.subsys_product_id = 5351 (0x14e7) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2829_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2829' (string)
info.product = 'SCSI Host Adapter' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2829_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0' (string)
scsi_host.host = 0 (0x0) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2829_scsi_host_scsi_device_lun0'
info.bus = 'scsi' (string)
info.linux.driver = 'sd' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2829_scsi_host' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2829_scsi_host_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 0 (0x0) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'ST9160823AS' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'disk' (string)
scsi.vendor = 'ATA' (string)
udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160823AS_5NK008R0'
block.device = '/dev/sda' (string)
block.is_volume = false (bool)
block.major = 8 (0x8) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160823AS_5NK008R0' (string)
info.capabilities = {'storage', 'block'} (string list)
info.category = 'storage' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2829_scsi_host_scsi_device_lun0' (string)
info.product = 'ST9160823AS' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160823AS_5NK008R0' (string)
info.vendor = 'ATA' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda' (string)
storage.automount_enabled_hint = true (bool)
storage.bus = 'scsi' (string)
storage.drive_type = 'disk' (string)
storage.firmware_version = '3.AA' (string)
storage.hotpluggable = false (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = false (bool)
storage.model = 'ST9160823AS' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/pci_8086_2829_scsi_host_scsi_device_lun0' (string)
storage.partitioning_scheme = 'mbr' (string)
storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_2829_scsi_host_scsi_device_lun0' (string)
storage.removable = false (bool)
storage.removable.media_available = true (bool)
storage.removable.media_size = 160041885696 (0x25433d6000) (uint64)
storage.requires_eject = false (bool)
storage.serial = 'SATA_ST9160823AS_5NK008R0' (string)
storage.size = 160041885696 (0x25433d6000) (uint64)
storage.vendor = 'ATA' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_3874e31f_5e09_4822_8c7f_0e21054d381b'
block.device = '/dev/sda7' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 7 (0x7) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160823AS_5NK008R0' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160823AS_5NK008R0' (string)
info.product = 'linux' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_3874e31f_5e09_4822_8c7f_0e21054d381b' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda7' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'reiser4' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '4' (string)
volume.ignore = true (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'linux' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec'} (string list)
volume.mount_point = '/' (string)
volume.num_blocks = 57094947 (0x3673323) (int)
volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
volume.partition.number = 7 (0x7) (int)
volume.partition.start = 41158656 (0x2740800) (uint64)
volume.size = 29232612864 (0x6ce664600) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '3874e31f-5e09-4822-8c7f-0e21054d381b' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_41834981_f92c_421e_ab7e_17b80fef49d2'
block.device = '/dev/sda6' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 6 (0x6) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160823AS_5NK008R0' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160823AS_5NK008R0' (string)
info.product = 'swap' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_41834981_f92c_421e_ab7e_17b80fef49d2' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda6' (string)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'swap' (string)
volume.fsusage = 'other' (string)
volume.fsversion = '2' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'swap' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 3919797 (0x3bcfb5) (int)
volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
volume.partition.number = 6 (0x6) (int)
volume.partition.start = 29273803776 (0x6d0dacc00) (uint64)
volume.size = 2006936064 (0x779f6a00) (uint64)
volume.uuid = '41834981-f92c-421e-ab7e-17b80fef49d2' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_3ea0eade_858a_402a_b22b_396a632d6873'
block.device = '/dev/sda5' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 5 (0x5) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160823AS_5NK008R0' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160823AS_5NK008R0' (string)
info.product = 'boot' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_3ea0eade_858a_402a_b22b_396a632d6873' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda5' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext2' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'boot' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec'} (string list)
volume.mount_point = '' (string)
volume.num_blocks = 80199 (0x13947) (int)
volume.partition.flags = {'boot'} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
volume.partition.number = 5 (0x5) (int)
volume.partition.scheme = 'embr' (string)
volume.partition.start = 64512 (0xfc00) (uint64)
volume.partition.type = '0x83' (string)
volume.partition.uuid = '' (string)
volume.size = 41061888 (0x2728e00) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '3ea0eade-858a-402a-b22b-396a632d6873' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_7672FD480A8A5E85'
block.device = '/dev/sda3' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 3 (0x3) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160823AS_5NK008R0' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160823AS_5NK008R0' (string)
info.product = 'Data' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_7672FD480A8A5E85' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda3' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ntfs' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '3.1' (string)
volume.ignore = true (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'Data' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'locale=', 'utf8'} (string list)
volume.mount_point = '/Data' (string)
volume.num_blocks = 198129645 (0xbcf37ed) (int)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
volume.partition.number = 3 (0x3) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 58596894720 (0xda4a5a800) (uint64)
volume.partition.type = '0x07' (string)
volume.partition.uuid = '' (string)
volume.size = 101442378240 (0x179e6fda00) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '7672FD480A8A5E85' (string)
udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024'
block.device = '/dev/sda2' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 2 (0x2) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160823AS_5NK008R0' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160823AS_5NK008R0' (string)
info.product = 'Volume' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda2' (string)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = '' (string)
volume.fsusage = 'partitiontable' (string)
volume.fsversion = '' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 2 (0x2) (int)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
volume.partition.number = 2 (0x2) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 32256 (0x7e00) (uint64)
volume.partition.type = '0x05' (string)
volume.partition.uuid = '' (string)
volume.size = 1024 (0x400) (uint64)
volume.uuid = '' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_CEE40E70E40E5ADB'
block.device = '/dev/sda1' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 1 (0x1) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160823AS_5NK008R0' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST9160823AS_5NK008R0' (string)
info.product = 'Windows' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_CEE40E70E40E5ADB' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda1' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ntfs' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '3.1' (string)
volume.ignore = true (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'Windows' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'locale=', 'utf8'} (string list)
volume.mount_point = '/Windows' (string)
volume.num_blocks = 53351865 (0x32e15b9) (int)
volume.partition.flags = {'boot'} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 160041885696 (0x25433d6000) (uint64)
volume.partition.number = 1 (0x1) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 31280739840 (0x7487a3600) (uint64)
volume.partition.type = '0x07' (string)
volume.partition.uuid = '' (string)
volume.size = 27316154880 (0x65c2b7200) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = 'CEE40E70E40E5ADB' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_2829_scsi_host_scsi_device_lun0_scsi_generic'
info.capabilities = {'scsi_generic'} (string list)
info.category = 'scsi_generic' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2829_scsi_host_scsi_device_lun0' (string)
info.product = 'SCSI Generic Interface' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2829_scsi_host_scsi_device_lun0_scsi_generic' (string)
linux.device_file = '/dev/sg0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_generic' (string)
linux.sysfs_path = '/sys/class/scsi_generic/sg0' (string)
scsi_generic.device = '/dev/sg0' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_2850'
info.bus = 'pci' (string)
info.linux.driver = 'PIIX_IDE' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2850' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1' (string)
pci.device_class = 1 (0x1) (int)
pci.device_protocol = 138 (0x8a) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1' (string)
pci.product = '82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller' (string)
pci.product_id = 10320 (0x2850) (int)
pci.subsys_product_id = 5351 (0x14e7) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2850_ide_0_0'
ide.channel = 0 (0x0) (int)
ide.host = 0 (0x0) (int)
info.bus = 'ide' (string)
info.linux.driver = 'ide-cdrom' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2850' (string)
info.product = 'IDE device (master)' (string)
info.subsystem = 'ide' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2850_ide_0_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'ide' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/ide0/0.0' (string)
udi = '/org/freedesktop/Hal/devices/storage_serial_KV775FI3034'
block.device = '/dev/hda' (string)
block.is_volume = false (bool)
block.major = 3 (0x3) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_KV775FI3034' (string)
info.addons = {'hald-addon-storage'} (string list)
info.capabilities = {'storage', 'block', 'storage.cdrom'} (string list)
info.category = 'storage' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2850_ide_0_0' (string)
info.product = 'HL-DT-ST DVDRAM GSA-T20N' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_KV775FI3034' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hda' (string)
org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
storage.automount_enabled_hint = true (bool)
storage.bus = 'ide' (string)
storage.cdrom.bd = false (bool)
storage.cdrom.bdr = false (bool)
storage.cdrom.bdre = false (bool)
storage.cdrom.cdr = true (bool)
storage.cdrom.cdrw = true (bool)
storage.cdrom.dvd = true (bool)
storage.cdrom.dvdplusr = true (bool)
storage.cdrom.dvdplusrdl = true (bool)
storage.cdrom.dvdplusrw = true (bool)
storage.cdrom.dvdplusrwdl = false (bool)
storage.cdrom.dvdr = true (bool)
storage.cdrom.dvdram = true (bool)
storage.cdrom.dvdrw = true (bool)
storage.cdrom.hddvd = false (bool)
storage.cdrom.hddvdr = false (bool)
storage.cdrom.hddvdrw = false (bool)
storage.cdrom.mo = false (bool)
storage.cdrom.mrw = true (bool)
storage.cdrom.mrw_w = true (bool)
storage.cdrom.read_speed = 4234 (0x108a) (int)
storage.cdrom.support_media_changed = true (bool)
storage.cdrom.support_multisession = true (bool)
storage.cdrom.write_speed = 4234 (0x108a) (int)
storage.cdrom.write_speeds = {'4234', '2822', '1764', '706'} (string list)
storage.drive_type = 'cdrom' (string)
storage.firmware_version = 'WR02' (string)
storage.hotpluggable = false (bool)
storage.media_check_enabled = true (bool)
storage.model = 'HL-DT-ST DVDRAM GSA-T20N' (string)
storage.no_partitions_hint = true (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/pci_8086_2850_ide_0_0' (string)
storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_2850_ide_0_0' (string)
storage.removable = true (bool)
storage.removable.media_available = false (bool)
storage.requires_eject = true (bool)
storage.serial = 'KV775FI3034' (string)
storage.size = 0 (0x0) (uint64)
storage.vendor = '' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_2815'
info.bus = 'pci' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801HEM (ICH8M) LPC Interface Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2815' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string)
pci.product = '82801HEM (ICH8M) LPC Interface Controller' (string)
pci.product_id = 10261 (0x2815) (int)
pci.subsys_product_id = 5351 (0x14e7) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2448'
info.bus = 'pci' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801 Mobile PCI Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 1 (0x1) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string)
pci.product = '82801 Mobile PCI Bridge' (string)
pci.product_id = 9288 (0x2448) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_1180_852'
info.bus = 'pci' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.product = 'xD-Picture Card Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1180_852' (string)
info.vendor = 'Ricoh Co Ltd' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:01.4' (string)
pci.device_class = 8 (0x8) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 128 (0x80) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:01.4' (string)
pci.product = 'xD-Picture Card Controller' (string)
pci.product_id = 2130 (0x852) (int)
pci.subsys_product_id = 5351 (0x14e7) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Ricoh Co Ltd' (string)
pci.vendor_id = 4480 (0x1180) (int)
udi = '/org/freedesktop/Hal/devices/pci_1180_592'
info.bus = 'pci' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.product = 'R5C592 Memory Stick Bus Host Adapter' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1180_592' (string)
info.vendor = 'Ricoh Co Ltd' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:01.3' (string)
pci.device_class = 8 (0x8) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 128 (0x80) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:01.3' (string)
pci.product = 'R5C592 Memory Stick Bus Host Adapter' (string)
pci.product_id = 1426 (0x592) (int)
pci.subsys_product_id = 5351 (0x14e7) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Ricoh Co Ltd' (string)
pci.vendor_id = 4480 (0x1180) (int)
udi = '/org/freedesktop/Hal/devices/pci_1180_843'
info.bus = 'pci' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.product = 'Unknown (0x0843)' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1180_843' (string)
info.vendor = 'Ricoh Co Ltd' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:01.2' (string)
pci.device_class = 8 (0x8) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 128 (0x80) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:01.2' (string)
pci.product_id = 2115 (0x843) (int)
pci.subsys_product_id = 5351 (0x14e7) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Ricoh Co Ltd' (string)
pci.vendor_id = 4480 (0x1180) (int)
udi = '/org/freedesktop/Hal/devices/pci_1180_822'
info.bus = 'pci' (string)
info.linux.driver = 'sdhci' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.product = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1180_822' (string)
info.vendor = 'Ricoh Co Ltd' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:01.1' (string)
pci.device_class = 8 (0x8) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 5 (0x5) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:01.1' (string)
pci.product = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter' (string)
pci.product_id = 2082 (0x822) (int)
pci.subsys_product_id = 5351 (0x14e7) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Ricoh Co Ltd' (string)
pci.vendor_id = 4480 (0x1180) (int)
udi = '/org/freedesktop/Hal/devices/pci_1180_822_mmc_host'
info.capabilities = {'mmc_host'} (string list)
info.category = 'mmc_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1180_822' (string)
info.product = 'MMC/SD Host Adapter' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1180_822_mmc_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'mmc_host' (string)
linux.sysfs_path = '/sys/class/mmc_host/mmc0' (string)
mmc_host.host = 0 (0x0) (int)
udi = '/org/freedesktop/Hal/devices/pci_1180_832'
info.bus = 'pci' (string)
info.linux.driver = 'ohci1394' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string)
info.product = 'R5C832 IEEE 1394 Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1180_832' (string)
info.vendor = 'Ricoh Co Ltd' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:01.0' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 16 (0x10) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:09:01.0' (string)
pci.product = 'R5C832 IEEE 1394 Controller' (string)
pci.product_id = 2098 (0x832) (int)
pci.subsys_product_id = 5351 (0x14e7) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Ricoh Co Ltd' (string)
pci.vendor_id = 4480 (0x1180) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2836'
info.bus = 'pci' (string)
info.linux.driver = 'ehci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) USB2 EHCI Controller #1' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2836' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 32 (0x20) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string)
pci.product = '82801H (ICH8 Family) USB2 EHCI Controller #1' (string)
pci.product_id = 10294 (0x2836) (int)
pci.subsys_product_id = 5351 (0x14e7) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2836' (string)
info.product = 'EHCI Host Controller' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7' (string)
info.vendor = 'Linux 2.6.22-gentoo-r1034 ehci_hcd' (string)
linux.device_file = '/dev/usb4' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4' (string)
usb_device.bus_number = 4 (0x4) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 1 (0x1) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 6 (0x6) (int)
usb_device.product = 'EHCI Host Controller' (string)
usb_device.product_id = 0 (0x0) (int)
usb_device.serial = '0000:00:1d.7' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.speed_bcd = 294912 (0x48000) (int)
usb_device.vendor = 'Linux 2.6.22-gentoo-r1034 ehci_hcd' (string)
usb_device.vendor_id = 0 (0x0) (int)
usb_device.version = 2.0 (2) (double)
usb_device.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-0:1.0' (string)
usb.bus_number = 4 (0x4) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 1 (0x1) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 6 (0x6) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 0 (0x0) (int)
usb.serial = '0000:00:1d.7' (string)
usb.speed = 480.0 (480) (double)
usb.speed_bcd = 294912 (0x48000) (int)
usb.vendor = 'Linux 2.6.22-gentoo-r1034 ehci_hcd' (string)
usb.vendor_id = 0 (0x0) (int)
usb.version = 2.0 (2) (double)
usb.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2832'
info.bus = 'pci' (string)
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) USB UHCI Controller #3' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2832' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string)
pci.product = '82801H (ICH8 Family) USB UHCI Controller #3' (string)
pci.product_id = 10290 (0x2832) (int)
pci.subsys_product_id = 5351 (0x14e7) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2832' (string)
info.product = 'UHCI Host Controller' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2' (string)
info.vendor = 'Linux 2.6.22-gentoo-r1034 uhci_hcd' (string)
linux.device_file = '/dev/usb7' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb7' (string)
usb_device.bus_number = 7 (0x7) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb7' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = 'UHCI Host Controller' (string)
usb_device.product_id = 0 (0x0) (int)
usb_device.serial = '0000:00:1d.2' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'Linux 2.6.22-gentoo-r1034 uhci_hcd' (string)
usb_device.vendor_id = 0 (0x0) (int)
usb_device.version = 1.1 (1.1) (double)
usb_device.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_8ff_1600_noserial'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2' (string)
info.product = 'Fingerprint Sensor' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_8ff_1600_noserial' (string)
info.vendor = 'AuthenTec, Inc.' (string)
linux.device_file = '/dev/7-2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-2' (string)
usb_device.bus_number = 7 (0x7) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 255 (0xff) (int)
usb_device.device_protocol = 255 (0xff) (int)
usb_device.device_revision_bcd = 3088 (0xc10) (int)
usb_device.device_subclass = 255 (0xff) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 2 (0x2) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-2' (string)
usb_device.max_power = 100 (0x64) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'Fingerprint Sensor' (string)
usb_device.product_id = 5632 (0x1600) (int)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'AuthenTec, Inc.' (string)
usb_device.vendor_id = 2303 (0x8ff) (int)
usb_device.version = 1.1 (1.1) (double)
usb_device.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_8ff_1600_noserial_if0'
info.bus = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_8ff_1600_noserial' (string)
info.product = 'USB Vendor Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_8ff_1600_noserial_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0' (string)
usb.bus_number = 7 (0x7) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 255 (0xff) (int)
usb.device_protocol = 255 (0xff) (int)
usb.device_revision_bcd = 3088 (0xc10) (int)
usb.device_subclass = 255 (0xff) (int)
usb.interface.class = 255 (0xff) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 255 (0xff) (int)
usb.interface.subclass = 255 (0xff) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0' (string)
usb.max_power = 100 (0x64) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Vendor Specific Interface' (string)
usb.product_id = 5632 (0x1600) (int)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'AuthenTec, Inc.' (string)
usb.vendor_id = 2303 (0x8ff) (int)
usb.version = 1.1 (1.1) (double)
usb.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-0:1.0' (string)
usb.bus_number = 7 (0x7) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 0 (0x0) (int)
usb.serial = '0000:00:1d.2' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'Linux 2.6.22-gentoo-r1034 uhci_hcd' (string)
usb.vendor_id = 0 (0x0) (int)
usb.version = 1.1 (1.1) (double)
usb.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2831'
info.bus = 'pci' (string)
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) USB UHCI Controller #2' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2831' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string)
pci.product = '82801H (ICH8 Family) USB UHCI Controller #2' (string)
pci.product_id = 10289 (0x2831) (int)
pci.subsys_product_id = 5351 (0x14e7) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2831' (string)
info.product = 'UHCI Host Controller' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1' (string)
info.vendor = 'Linux 2.6.22-gentoo-r1034 uhci_hcd' (string)
linux.device_file = '/dev/usb6' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6' (string)
usb_device.bus_number = 6 (0x6) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = 'UHCI Host Controller' (string)
usb_device.product_id = 0 (0x0) (int)
usb_device.serial = '0000:00:1d.1' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'Linux 2.6.22-gentoo-r1034 uhci_hcd' (string)
usb_device.vendor_id = 0 (0x0) (int)
usb_device.version = 1.1 (1.1) (double)
usb_device.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-0:1.0' (string)
usb.bus_number = 6 (0x6) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 0 (0x0) (int)
usb.serial = '0000:00:1d.1' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'Linux 2.6.22-gentoo-r1034 uhci_hcd' (string)
usb.vendor_id = 0 (0x0) (int)
usb.version = 1.1 (1.1) (double)
usb.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2830'
info.bus = 'pci' (string)
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) USB UHCI Controller #1' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2830' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string)
pci.product = '82801H (ICH8 Family) USB UHCI Controller #1' (string)
pci.product_id = 10288 (0x2830) (int)
pci.subsys_product_id = 5351 (0x14e7) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2830' (string)
info.product = 'UHCI Host Controller' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0' (string)
info.vendor = 'Linux 2.6.22-gentoo-r1034 uhci_hcd' (string)
linux.device_file = '/dev/usb5' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb5' (string)
usb_device.bus_number = 5 (0x5) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb5' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = 'UHCI Host Controller' (string)
usb_device.product_id = 0 (0x0) (int)
usb_device.serial = '0000:00:1d.0' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'Linux 2.6.22-gentoo-r1034 uhci_hcd' (string)
usb_device.vendor_id = 0 (0x0) (int)
usb_device.version = 1.1 (1.1) (double)
usb_device.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0' (string)
info.product = 'Logitech USB Optical Mouse' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial' (string)
info.vendor = 'Logitech, Inc.' (string)
linux.device_file = '/dev/5-2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2' (string)
usb_device.bus_number = 5 (0x5) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 17152 (0x4300) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 2 (0x2) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2' (string)
usb_device.max_power = 100 (0x64) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'Logitech USB Optical Mouse' (string)
usb_device.product_id = 49177 (0xc019) (int)
usb_device.speed = 1.5 (1.5) (double)
usb_device.speed_bcd = 336 (0x150) (int)
usb_device.vendor = 'Logitech, Inc.' (string)
usb_device.vendor_id = 1133 (0x46d) (int)
usb_device.version = 2.0 (2) (double)
usb_device.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial_if0'
info.bus = 'usb' (string)
info.linux.driver = 'usbmouse' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial' (string)
info.product = 'USB HID Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0' (string)
usb.bus_number = 5 (0x5) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 17152 (0x4300) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 3 (0x3) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 2 (0x2) (int)
usb.interface.subclass = 1 (0x1) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0' (string)
usb.max_power = 100 (0x64) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB HID Interface' (string)
usb.product_id = 49177 (0xc019) (int)
usb.speed = 1.5 (1.5) (double)
usb.speed_bcd = 336 (0x150) (int)
usb.vendor = 'Logitech, Inc.' (string)
usb.vendor_id = 1133 (0x46d) (int)
usb.version = 2.0 (2) (double)
usb.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial_if0_logicaldev_input'
info.capabilities = {'input', 'input.mouse'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial_if0' (string)
info.product = 'Logitech Logitech USB Optical Mouse' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial_if0_logicaldev_input' (string)
input.device = '/dev/input/event5' (string)
input.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial_if0' (string)
input.physical_device = '/org/freedesktop/Hal/devices/usb_device_46d_c019_noserial_if0' (string)
input.product = 'Logitech Logitech USB Optical Mouse' (string)
linux.device_file = '/dev/input/event5' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input5/event5' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-0:1.0' (string)
usb.bus_number = 5 (0x5) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 0 (0x0) (int)
usb.serial = '0000:00:1d.0' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'Linux 2.6.22-gentoo-r1034 uhci_hcd' (string)
usb.vendor_id = 0 (0x0) (int)
usb.version = 1.1 (1.1) (double)
usb.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2849'
info.bus = 'pci' (string)
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) PCI Express Port 6' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2849' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.5' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.5' (string)
pci.product = '82801H (ICH8 Family) PCI Express Port 6' (string)
pci.product_id = 10313 (0x2849) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2847'
info.bus = 'pci' (string)
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) PCI Express Port 5' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2847' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.4' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.4' (string)
pci.product = '82801H (ICH8 Family) PCI Express Port 5' (string)
pci.product_id = 10311 (0x2847) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2845'
info.bus = 'pci' (string)
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) PCI Express Port 4' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2845' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.3' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.3' (string)
pci.product = '82801H (ICH8 Family) PCI Express Port 4' (string)
pci.product_id = 10309 (0x2845) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2843'
info.bus = 'pci' (string)
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) PCI Express Port 3' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2843' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2' (string)
pci.product = '82801H (ICH8 Family) PCI Express Port 3' (string)
pci.product_id = 10307 (0x2843) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2841'
info.bus = 'pci' (string)
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) PCI Express Port 2' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2841' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1' (string)
pci.product = '82801H (ICH8 Family) PCI Express Port 2' (string)
pci.product_id = 10305 (0x2841) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_4229'
info.bus = 'pci' (string)
info.linux.driver = 'iwl4965' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2841' (string)
info.product = 'PRO/Wireless 4965 AG or AGN Network Connection' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_4229' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0' (string)
pci.device_class = 2 (0x2) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 128 (0x80) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0' (string)
pci.product = 'PRO/Wireless 4965 AG or AGN Network Connection' (string)
pci.product_id = 16937 (0x4229) (int)
pci.subsys_product_id = 4353 (0x1101) (int)
pci.subsys_vendor = 'Intel Corporation' (string)
pci.subsys_vendor_id = 32902 (0x8086) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/net_00_13_e8_24_6c_27_0'
info.capabilities = {'net', 'net.80211control'} (string list)
info.category = 'net.80211control' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_4229' (string)
info.product = 'Networking Wireless Control Interface' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_13_e8_24_6c_27_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/class/net/wmaster0' (string)
net.address = '00:13:e8:24:6c:27' (string)
net.arp_proto_hw_id = 801 (0x321) (int)
net.interface = 'wmaster0' (string)
net.linux.ifindex = 3 (0x3) (int)
net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_4229' (string)
net.physical_device = '/org/freedesktop/Hal/devices/pci_8086_4229' (string)
udi = '/org/freedesktop/Hal/devices/net_00_13_e8_24_6c_27'
info.capabilities = {'net', 'net.80211'} (string list)
info.category = 'net.80211' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_4229' (string)
info.product = 'WLAN Interface' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_13_e8_24_6c_27' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/class/net/wlan0' (string)
net.80211.mac_address = 85499079719 (0x13e8246c27) (uint64)
net.address = '00:13:e8:24:6c:27' (string)
net.arp_proto_hw_id = 1 (0x1) (int)
net.interface = 'wlan0' (string)
net.linux.ifindex = 4 (0x4) (int)
net.originating_device = '/org/freedesktop/Hal/devices/pci_8086_4229' (string)
net.physical_device = '/org/freedesktop/Hal/devices/pci_8086_4229' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_283f'
info.bus = 'pci' (string)
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) PCI Express Port 1' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_283f' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' (string)
pci.product = '82801H (ICH8 Family) PCI Express Port 1' (string)
pci.product_id = 10303 (0x283f) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_1969_1048'
info.bus = 'pci' (string)
info.linux.driver = 'atl1' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_283f' (string)
info.product = 'L1 Gigabit Ethernet Adapter' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1969_1048' (string)
info.vendor = 'Attansic Technology Corp.' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0' (string)
pci.device_class = 2 (0x2) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0' (string)
pci.product = 'L1 Gigabit Ethernet Adapter' (string)
pci.product_id = 4168 (0x1048) (int)
pci.subsys_product_id = 5349 (0x14e5) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Attansic Technology Corp.' (string)
pci.vendor_id = 6505 (0x1969) (int)
udi = '/org/freedesktop/Hal/devices/net_00_1b_fc_48_4c_8d'
info.capabilities = {'net', 'net.80203'} (string list)
info.category = 'net.80203' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_1969_1048' (string)
info.product = 'Networking Interface' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_1b_fc_48_4c_8d' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/class/net/eth0' (string)
net.80203.mac_address = 120196713613 (0x1bfc484c8d) (uint64)
net.address = '00:1b:fc:48:4c:8d' (string)
net.arp_proto_hw_id = 1 (0x1) (int)
net.interface = 'eth0' (string)
net.linux.ifindex = 2 (0x2) (int)
net.originating_device = '/org/freedesktop/Hal/devices/pci_1969_1048' (string)
net.physical_device = '/org/freedesktop/Hal/devices/pci_1969_1048' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b'
info.bus = 'pci' (string)
info.linux.driver = 'HDA Intel' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) HD Audio Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string)
pci.device_class = 4 (0x4) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string)
pci.product = '82801H (ICH8 Family) HD Audio Controller' (string)
pci.product_id = 10315 (0x284b) (int)
pci.subsys_product_id = 4921 (0x1339) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_alsa_playback_6'
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device = 6 (0x6) (int)
alsa.device_file = '/dev/snd/pcmC0D6p' (string)
alsa.device_id = 'Si3054 Modem' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
alsa.pcm_class = 'modem' (string)
alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
alsa.type = 'playback' (string)
info.capabilities = {'alsa'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
info.product = 'Si3054 Modem ALSA Playback Device' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_alsa_playback_6' (string)
linux.device_file = '/dev/snd/pcmC0D6p' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/pcmC0D6p' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_alsa_capture_6'
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device = 6 (0x6) (int)
alsa.device_file = '/dev/snd/pcmC0D6c' (string)
alsa.device_id = 'Si3054 Modem' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
alsa.pcm_class = 'modem' (string)
alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
alsa.type = 'capture' (string)
info.capabilities = {'alsa'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
info.product = 'Si3054 Modem ALSA Capture Device' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_alsa_capture_6' (string)
linux.device_file = '/dev/snd/pcmC0D6c' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/pcmC0D6c' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_alsa_playback_0'
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/pcmC0D0p' (string)
alsa.device_id = 'ALC861VD Analog' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
alsa.pcm_class = 'generic' (string)
alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
alsa.type = 'playback' (string)
info.capabilities = {'alsa'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
info.product = 'ALC861VD Analog ALSA Playback Device' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_alsa_playback_0' (string)
linux.device_file = '/dev/snd/pcmC0D0p' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/pcmC0D0p' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_alsa_capture_0'
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/pcmC0D0c' (string)
alsa.device_id = 'ALC861VD Analog' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
alsa.pcm_class = 'generic' (string)
alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
alsa.type = 'capture' (string)
info.capabilities = {'alsa'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
info.product = 'ALC861VD Analog ALSA Capture Device' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_alsa_capture_0' (string)
linux.device_file = '/dev/snd/pcmC0D0c' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/pcmC0D0c' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_oss_mixer__1'
info.capabilities = {'oss'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
info.product = 'ALC861VD Analog OSS Control Device' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_oss_mixer__1' (string)
linux.device_file = '/dev/sound/mixer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/mixer' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'HDA Intel' (string)
oss.device_file = '/dev/sound/mixer' (string)
oss.device_id = 'ALC861VD Analog' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
oss.physical_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
oss.type = 'mixer' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_oss_pcm_0_0'
info.capabilities = {'oss'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
info.product = 'ALC861VD Analog OSS PCM Device' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_oss_pcm_0_0' (string)
linux.device_file = '/dev/sound/dsp' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/dsp' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'HDA Intel' (string)
oss.device = 0 (0x0) (int)
oss.device_file = '/dev/sound/dsp' (string)
oss.device_id = 'ALC861VD Analog' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
oss.physical_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
oss.type = 'pcm' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_alsa_control__1'
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device_file = '/dev/snd/controlC0' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
alsa.type = 'control' (string)
info.capabilities = {'alsa'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
info.product = 'HDA Intel ALSA Control Device' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_alsa_control__1' (string)
linux.device_file = '/dev/snd/controlC0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/controlC0' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_284b_oss_pcm_0'
info.capabilities = {'oss'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
info.product = 'ALC861VD Analog OSS PCM Device' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_284b_oss_pcm_0' (string)
linux.device_file = '/dev/sound/audio' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/audio' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'HDA Intel' (string)
oss.device = 0 (0x0) (int)
oss.device_file = '/dev/sound/audio' (string)
oss.device_id = 'ALC861VD Analog' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
oss.physical_device = '/org/freedesktop/Hal/devices/pci_8086_284b' (string)
oss.type = 'pcm' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_283a'
info.bus = 'pci' (string)
info.linux.driver = 'ehci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) USB2 EHCI Controller #2' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_283a' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 32 (0x20) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7' (string)
pci.product = '82801H (ICH8 Family) USB2 EHCI Controller #2' (string)
pci.product_id = 10298 (0x283a) (int)
pci.subsys_product_id = 5351 (0x14e7) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_7'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_283a' (string)
info.product = 'EHCI Host Controller' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_7' (string)
info.vendor = 'Linux 2.6.22-gentoo-r1034 ehci_hcd' (string)
linux.device_file = '/dev/usb3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3' (string)
usb_device.bus_number = 3 (0x3) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 1 (0x1) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 4 (0x4) (int)
usb_device.product = 'EHCI Host Controller' (string)
usb_device.product_id = 0 (0x0) (int)
usb_device.serial = '0000:00:1a.7' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.speed_bcd = 294912 (0x48000) (int)
usb_device.vendor = 'Linux 2.6.22-gentoo-r1034 ehci_hcd' (string)
usb_device.vendor_id = 0 (0x0) (int)
usb_device.version = 2.0 (2) (double)
usb_device.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_174f_6a31___________________________________________________________________Syntek_____USB2_0___________________Audio'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_7' (string)
info.product = 'USB2.0' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_174f_6a31___________________________________________________________________Syntek_____USB2_0___________________Audio' (string)
info.vendor = 'Syntek' (string)
linux.device_file = '/dev/3-2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-2' (string)
usb_device.bus_number = 3 (0x3) (int)
usb_device.can_wake_up = false (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 5 (0x5) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 2 (0x2) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-2' (string)
usb_device.max_power = 500 (0x1f4) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'USB2.0' (string)
usb_device.product_id = 27185 (0x6a31) (int)
usb_device.serial = '??????????????????????????????????????????????????????????????????Syntek ?USB2.0 ?Audio' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.speed_bcd = 294912 (0x48000) (int)
usb_device.vendor = 'Syntek' (string)
usb_device.vendor_id = 5967 (0x174f) (int)
usb_device.version = 2.0 (2) (double)
usb_device.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_174f_6a31___________________________________________________________________Syntek_____USB2_0___________________Audio_if0'
info.bus = 'usb' (string)
info.linux.driver = 'usb_stk11xx_driver' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_174f_6a31___________________________________________________________________Syntek_____USB2_0___________________Audio' (string)
info.product = 'USB Vendor Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_174f_6a31___________________________________________________________________Syntek_____USB2_0___________________Audio_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-2/3-2:1.0' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 5 (0x5) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 255 (0xff) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 255 (0xff) (int)
usb.interface.subclass = 255 (0xff) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-2/3-2:1.0' (string)
usb.max_power = 500 (0x1f4) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Vendor Specific Interface' (string)
usb.product_id = 27185 (0x6a31) (int)
usb.serial = '??????????????????????????????????????????????????????????????????Syntek ?USB2.0 ?Audio' (string)
usb.speed = 480.0 (480) (double)
usb.speed_bcd = 294912 (0x48000) (int)
usb.vendor = 'Syntek' (string)
usb.vendor_id = 5967 (0x174f) (int)
usb.version = 2.0 (2) (double)
usb.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_7_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_7' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_7_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-0:1.0' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 1 (0x1) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.7/usb3/3-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 4 (0x4) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 0 (0x0) (int)
usb.serial = '0000:00:1a.7' (string)
usb.speed = 480.0 (480) (double)
usb.speed_bcd = 294912 (0x48000) (int)
usb.vendor = 'Linux 2.6.22-gentoo-r1034 ehci_hcd' (string)
usb.vendor_id = 0 (0x0) (int)
usb.version = 2.0 (2) (double)
usb.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2835'
info.bus = 'pci' (string)
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) USB UHCI Controller #5' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2835' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1' (string)
pci.product = '82801H (ICH8 Family) USB UHCI Controller #5' (string)
pci.product_id = 10293 (0x2835) (int)
pci.subsys_product_id = 5351 (0x14e7) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_1'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2835' (string)
info.product = 'UHCI Host Controller' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_1' (string)
info.vendor = 'Linux 2.6.22-gentoo-r1034 uhci_hcd' (string)
linux.device_file = '/dev/usb2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2' (string)
usb_device.bus_number = 2 (0x2) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = 'UHCI Host Controller' (string)
usb_device.product_id = 0 (0x0) (int)
usb_device.serial = '0000:00:1a.1' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'Linux 2.6.22-gentoo-r1034 uhci_hcd' (string)
usb_device.vendor_id = 0 (0x0) (int)
usb_device.version = 1.1 (1.1) (double)
usb_device.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_b05_1712_0194E8_5B_0002'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_1' (string)
info.product = 'Unknown (0x1712)' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_b05_1712_0194E8_5B_0002' (string)
info.vendor = 'ASUSTek Computer, Inc.' (string)
linux.device_file = '/dev/2-2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-2' (string)
usb_device.bus_number = 2 (0x2) (int)
usb_device.can_wake_up = false (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 224 (0xe0) (int)
usb_device.device_protocol = 1 (0x1) (int)
usb_device.device_revision_bcd = 6421 (0x1915) (int)
usb_device.device_subclass = 1 (0x1) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 2 (0x2) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-2' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 3 (0x3) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product_id = 5906 (0x1712) (int)
usb_device.serial = '0194E8-5B-0002' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.speed_bcd = 4608 (0x1200) (int)
usb_device.vendor = 'ASUSTek Computer, Inc.' (string)
usb_device.vendor_id = 2821 (0xb05) (int)
usb_device.version = 2.0 (2) (double)
usb_device.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_b05_1712_0194E8_5B_0002_if2'
info.bus = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_b05_1712_0194E8_5B_0002' (string)
info.product = 'USB Application Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_b05_1712_0194E8_5B_0002_if2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.2' (string)
usb.bus_number = 2 (0x2) (int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 224 (0xe0) (int)
usb.device_protocol = 1 (0x1) (int)
usb.device_revision_bcd = 6421 (0x1915) (int)
usb.device_subclass = 1 (0x1) (int)
usb.interface.class = 254 (0xfe) (int)
usb.interface.number = 2 (0x2) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 1 (0x1) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.2' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 3 (0x3) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Application Specific Interface' (string)
usb.product_id = 5906 (0x1712) (int)
usb.serial = '0194E8-5B-0002' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'ASUSTek Computer, Inc.' (string)
usb.vendor_id = 2821 (0xb05) (int)
usb.version = 2.0 (2) (double)
usb.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_b05_1712_0194E8_5B_0002_if1'
info.bus = 'usb' (string)
info.linux.driver = 'hci_usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_b05_1712_0194E8_5B_0002' (string)
info.product = 'USB Wireless Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_b05_1712_0194E8_5B_0002_if1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.1' (string)
usb.bus_number = 2 (0x2) (int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 224 (0xe0) (int)
usb.device_protocol = 1 (0x1) (int)
usb.device_revision_bcd = 6421 (0x1915) (int)
usb.device_subclass = 1 (0x1) (int)
usb.interface.class = 224 (0xe0) (int)
usb.interface.number = 1 (0x1) (int)
usb.interface.protocol = 1 (0x1) (int)
usb.interface.subclass = 1 (0x1) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.1' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 3 (0x3) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Wireless Interface' (string)
usb.product_id = 5906 (0x1712) (int)
usb.serial = '0194E8-5B-0002' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'ASUSTek Computer, Inc.' (string)
usb.vendor_id = 2821 (0xb05) (int)
usb.version = 2.0 (2) (double)
usb.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_b05_1712_0194E8_5B_0002_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hci_usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_b05_1712_0194E8_5B_0002' (string)
info.product = 'USB Wireless Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_b05_1712_0194E8_5B_0002_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0' (string)
usb.bus_number = 2 (0x2) (int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 224 (0xe0) (int)
usb.device_protocol = 1 (0x1) (int)
usb.device_revision_bcd = 6421 (0x1915) (int)
usb.device_subclass = 1 (0x1) (int)
usb.interface.class = 224 (0xe0) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 1 (0x1) (int)
usb.interface.subclass = 1 (0x1) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 3 (0x3) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Wireless Interface' (string)
usb.product_id = 5906 (0x1712) (int)
usb.serial = '0194E8-5B-0002' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'ASUSTek Computer, Inc.' (string)
usb.vendor_id = 2821 (0xb05) (int)
usb.version = 2.0 (2) (double)
usb.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_b05_1712_0194E8_5B_0002_if0_bluetooth_hci'
bluetooth_hci.originating_device = '/org/freedesktop/Hal/devices/usb_device_b05_1712_0194E8_5B_0002_if0' (string)
bluetooth_hci.physical_device = '/org/freedesktop/Hal/devices/usb_device_b05_1712_0194E8_5B_0002_if0' (string)
info.capabilities = {'bluetooth_hci'} (string list)
info.category = 'bluetooth_hci' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_b05_1712_0194E8_5B_0002_if0' (string)
info.product = 'Bluetooth Host Controller Interface' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_b05_1712_0194E8_5B_0002_if0_bluetooth_hci' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'bluetooth' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0/hci0' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_1_if0'
info.bus = 'usb' (string)
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_1' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_1_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-0:1.0' (string)
usb.bus_number = 2 (0x2) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 0 (0x0) (int)
usb.serial = '0000:00:1a.1' (string)
usb.speed = 12.0 (12) (double)
usb.speed_bcd = 4608 (0x1200) (int)
usb.vendor = 'Linux 2.6.22-gentoo-r1034 uhci_hcd' (string)
usb.vendor_id = 0 (0x0) (int)
usb.version = 1.1 (1.1) (double)
usb.version_bcd = 272 (0x110) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2834'
info.bus = 'pci' (string)
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801H (ICH8 Family) USB UHCI Contoller #4' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2834' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0' (string)
pci.product = '82801H (ICH8 Family) USB UHCI Contoller #4' (string)
pci.product_id = 10292 (0x2834) (int)
pci.subsys_product_id = 5351 (0x14e7) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_0'
info.bus = 'usb_device' (string)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2834' (string)
info.product = 'UHCI Host Controller' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1a_0' (string)
info.vendor = 'Linux 2.6.22-gentoo-r1034 uhci_hcd' (string)
linux.device_file = '/dev/usb1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configuration |